Uncoated reinforcing mesh
Uncoated reinforcing mesh consists of factory-welded grids made from ribbed reinforcing steel. It enables efficient area reinforcement of floor slabs, ceilings, walls and other reinforced-concrete components.
Common Q reinforcing mesh at a glance
The following standard mesh types are common in the German supply programme. The table is for guidance; current availability, ductility class and specification are confirmed for each enquiry.
What is reinforcing mesh used for?
Q mesh provides an equivalent reinforcement cross-section in both directions and is typically used where loads act in two directions. The required reinforcement must always be specified by the structural engineer.
Technical specification and standard: Common standard mesh made from B500A reinforcing steel, ductility class A, to DIN 488-4; manufacturing plants are subject to quality monitoring to DIN 488-6. Other specifications, including B500B, are available on request.
- Standardised sheet dimensions for efficient processing
- Cutting and project-specific delivery on request
- Q mesh and other specifications procurable to technical requirements
| Mesh | Sheet size | Bar spacing longitudinal / transverse | Bar Ø longitudinal / transverse | Weight per sheet |
|---|---|---|---|---|
| Q188A | 6,00 × 2,30 m | 150 / 150 mm | 6 / 6 mm | 41,7 kg |
| Q257A | 6,00 × 2,30 m | 150 / 150 mm | 7 / 7 mm | 56,8 kg |
| Q335A | 6,00 × 2,30 m | 150 / 150 mm | 8 / 8 mm | 74,3 kg |
| Q424A | 6,00 × 2,30 m | 150 / 150 mm | 9 / 9 mm | 84,4 kg |
| Q524A | 6,00 × 2,30 m | 150 / 150 mm | 10 / 10 mm | 100,9 kg |
| Q636A | 6,00 × 2,35 m | 100 / 125 mm | 9 / 10 mm | 132,0 kg |
Guide values based on common German standard-mesh programmes. The order confirmation, structural design and current manufacturer documents are authoritative.
Do you need reinforcing mesh for your construction project?
Send us the mesh type, quantity, ductility class and any required processing. We will check the appropriate supply option.