Galvanized angle steel
Galvanized angle steel combines a versatile L-shaped section with a protective zinc surface. It is suitable for frames, brackets, edgings, reinforcements and indoor or outdoor structures.
Common sizes and weights per metre
The table shows typical trade dimensions for guidance. Actual stock availability, standard, surface finish and cutting are clarified to match your enquiry.
What is Galvanized angle steel used for?
Galvanized angle steel combines a versatile L-shaped section with a protective zinc surface. It is suitable for frames, brackets, edgings, reinforcements and indoor or outdoor structures. Indicative weights refer to the base material; the zinc coating and actual specification can affect the final weight. Surface, dimensions, length and processing are coordinated for each project.
Technical specification and standard: Equal and unequal S235JR angle steel, stock length 6–6.3 m, to DIN 1013–1029 and hot-dip galvanised to DIN EN 1461.
- Cutting and project-related picking available
- Advice on dimensions, weight and alternative sections
- Delivery in the Krefeld area, the Rhineland and beyond
| Dimension | Weight / guide |
|---|---|
| 20 x 20 x 3 mm | 0,87 kg/m |
| 25 x 25 x 3 mm | 1,11 kg/m |
| 30 x 30 x 4 mm | 1,76 kg/m |
| 40 x 40 x 4 mm | 2,39 kg/m |
| 50 x 50 x 5 mm | 3,73 kg/m |
| 60 x 60 x 6 mm | 5,37 kg/m |
| 80 x 80 x 8 mm | 9,55 kg/m |
| 100 x 100 x 10 mm | 14,91 kg/m |
Do you need galvanized angle steel cut to size?
Send us the dimensions, length, quantity and required processing. We will check availability, cutting and delivery.